Educational Information
*60 gallons per person per day - Total Household Usage or K label capacity
*Number of people X 60 gallons per person X gpg of hardness X 3 days =
capacity required between regenerations
*Consult your factory representative for water that is 75 gpg or harder
*(Note: for high volume households, use 75 gallons per day per person)
* 1 mg/l of iron = 4 gpg
* 1 mg/l of manganese = 8 gpg
* Maximum iron is not to exceed 1.5 mg/l total iron
* Recommend the addition of a Res-up feeder when total iron exceeds 0.5 mg/l
* This unit should be recommended only when dictated by special circumstances or
the needs of the customer
* The customer should be aware that a separate iron filter and softener
is preferred because it is a more efficient way
to deal with the water
* When a combination unit is recommended, follow the guidelines provided
in the specifications
The volume of water used during the regeneration process of a water softener will vary depending on:
* Amount and type of resin
* Cycle time settings
* Flow controls
* Salt settings
* Tank diameter
Generally, water usage for regeneration is based on the cubic feet of resin per water softener from a low of 30 gallons of water per cubic foot, to a maximum of 100 gallons of water per cubic foot. Manufacturing specs and settings for each model size should be checked to verify exact amounts.
1. To determine the size of the water softener required.
2. To allow for reserve capacity between regenerations so the customer
does not run out of soft water.
3. To provide the most economical operation cost.
|